DIVERSEY TASKI JONTEC ESD - Static Dissipative Floor Emulsion - Code 7512701 - Made in the Netherlands - Set of 2 Pieces - 2 x 5 Liters - Code 7512701 - https://www.youtube.com/watch?v=jF8HIu9cXYA - Made in the Netherlands - Active ingredients: (2-Methoxymethylethoxy)propanol and Lithium Chloride - Protects floor investment against traffic abuse, and eases cleaning - Eliminates risk of electric shock and damages of equipment - Fulfills basic requirement of IEC 61340-5-1 - Enhances safety for employee, patient and customer - Delivers a warm gloss, protective layer - ESD approved by independent laboratories - Dissipate electric charges over the floor surface or let to ground on conductive floor - Ready to use, no dilution required - Ideal solution for area with static dissipative issue - Suitable for ESD approved floor to help ease cleaning - Slip resistant according to international standard ASTM D-2047 - Always apply 3 coats on the floor - Recoat in medium to high traffic area every 3 months and in low traffic areas every 6 months - Do not rinse the floor after application How to Use - Treat only stripped and thoroughly rinsed and completely dry floor - Sparingly pour the product onto floor and evenly spread it while still wet with a polish applicator in overlapping lanes of 1 - 1.5 m. - Always apply 3 coats on the floor - Always allow a 60 minutes minimum drying time in between two coats - After the last coat, allow minimum 60 minutes before traffic. - Recoat in medium to high traffic area every 3 months and in low traffic areas every 6 months Maintenance - Always allow a new treatment to cure for 48 hours before doing any type of wet maintenance - Remove loose dirt with a dry mop on a daily basis - Apply TASKI 3 times a week for moderate to heavy traffic area - Apply once a week or as needed on light traffic area - In dry environment, apply 3 times a week to keep static dissipative reading low. Active ingredient (2-Methoxymethylethoxy)propanol and Lithium Chloride